4 Effective Solutions if AC isn’t Cooling
Often you may have noticed that your central air conditioner is possibly not chilling your indoors down to the temperature you have set on your thermostat. It could be your home as well as your office. It is quite obvious for you to feel irritated and you must be ready to give a call for a professional AC repair in California if you are residing in its proximity.
But, do you know that at times you can fix them too in the DIY method? Whenever you find that the AC is malfunctioning, the first thought that comes to your mind is whether you require air conditioning replacement in California. Why would you do so as any AC installation involves a huge investment?
So, before coming to any conclusions there are a few quick troubleshooting steps that you may try on your own. If your AC isn’t cooling your home appropriately, probe the following-
Whether Your Thermostat is Switched On
Whether Your Air Filter is Filthy
Whether Your Outside Unit is Messed Up
Whether Your Circuit Breaker Has Tripped
Once you’ve checked for the all issues mentioned above, but your AC still isn’t cooling down the house, there is possibly a larger problem that necessitates a professional AC repair in Riverside, if you are staying anywhere near its proximity.
Your AC may be running, but your indoors aren’t chilling enough. Verify each of the following and adhere to the solutions mentioned-
1. If the Thermostat is Switched On
If your thermostat switch is set to On, it means that the blower will run continuously, although the system isn’t cooling indoors, which leads to the blowing of warm air from your vents.
Solution: Switch your thermostat to AUTO, so that air exclusively blows from your vents while the AC is cooling.
2. If the Air Filter is Filthy
A dirty AC filter minimizes airflow in your system, pressurizing your system to try hard for chilling your home.
Solution: If your filter is filthy, it’s high time for you to replace it and bring a new one.
3. If the Outside Unit is Messed Up
If the condenser, the outdoor unit that drives heat out from your home is messed up or covered in debris; it can’t eliminate the heat so effortlessly.
Solution: Remove all debris and try to cleanse the condenser fins softly with a garden hose. Never try to use a strong stream or you’ll endanger the fragile condenser fins that allow airflow to cool the refrigerant.
4. If the Circuit Breaker Has Tripped
Most of the ACs nowadays comprise 2 circuit breakers- one for the outside unit and one for the inside unit. Unfortunately, if the outside unit’s breaker gets tripped, the indoor unit will keep blowing air into your home and it will only get warmer.
Solution: Check your breaker box to verify if the outdoor unit’s breaker has tripped. If it has, switches it on. If it trips again, do not reset it. This implies that there’s a major electrical issue that only an expert or a professional technician can fix.
Inference
If you have checked everything on the list and still your AC isn’t cooling your home, then you need to realize that a mere DIY method wouldn’t be enough and you need to seek help from a professional technician.

Comments
Post a Comment